The capacitance of the run capacitor can be determined using specific formulas: C = 1950 × I / (U × cosφ) for single-capacitor operation, and C = 1200 × I / (U × cosφ) for dual-capacitor operation. In practice, an empirical method may also be used for estimation, typically allocating 2–3 μF of capacitance per 100 W of motor power. While there is some flexibility regarding the capacitance value, it must align with the motor's original specifications; values that are too high or too low can impair motor performance, potentially causing overheating, reduced efficiency, or weak starting torque.
Voltage specifications for the capacitor are critical; its rated voltage must be at least 1.5 times the motor's rated voltage. For a 220 V power supply, the capacitor's rated voltage should generally be no less than 400 V or 450 V.
Run capacitors are typically connected to the motor's auxiliary winding. The primary wiring configurations are the single-capacitor method and the dual-capacitor method.
During installation, the capacitor should be secured to the motor housing, kept away from harsh conditions such as high temperatures or humidity, and connected correctly.
